KNX MTN631744 Movement detector 180/2.20 m flush-mounted, white, glossy

Indoor movement detector with anti-crawl
protection.
When a movement is detected, a data
telegram defined by the programming is
transmitted.
With integrated bus coupling unit. For wall
mounting in a size 60 mounting box, optimal
installation at 2.2 m.
KNX software functions: Five movement
blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, safety
pause, disable function. Sensitivity, brightness
and staircase timer can be set using the
ETS or the potentiometer. Two movement
sensors: the sensitivity and range can be set
separately for each sensor. Self-adjusting
staircase timer.
Angle of detection: 180°
Range: 8 m right/left, 12 m to the front (for a
mounting height of 2.20 m)
Mounting height: 2.2 m or 1.1 m with half
the range
Number of levels: 6
Number of zones: 46
Number of movement sensors: 2, sectororientated,
adjustable
Sensitivity: infinitely adjustable (ETS or
potentiometer)
Light sensor: infinitely adjustable from approx.
10 to 2000 Lux (ETS or potentiometer)
Time: adjustable in steps from 1 s to 8 min
(potentiometer) or adjustable from 1 s to 255
hours (ETS)
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal and
supporting plate.
With cover segments to limit the area of
detection.