KNX MTN630919 Movement Detector ARGUS Presence with light control and IR receiver, polar white

Presence detection indoors.
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted
via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device
constantly monitors the brightness in the room. If sufficient natural light is at hand, the device
switches the artificial light off even if a person is present. The overshoot time can be adjusted
using the ETS.
Light control enables the required brightness in a room to be achieved permanently. Dimming
and the optional use of a second lighting group maintains a constant brightness.
Individual ARGUS Presence configurations can be changed or other KNX devices can be
controlled remotely using the IR receiver.
With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal
installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for
ARGUS Presence.
KNX software functions: Five movement/presence blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
An additional light control block: brightness can be maintained constant by dimming and an
additional adjustable level.
IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors
or range.
Normal operation, master, slave, monitoring, safety pause, disable function. Four movement
sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase
timer. Actual brightness value: can be detected via the internal and/or an external light
sensor. Actual value correction.
Angle of detection: 360°
Range: a radius of max. 7 m (at a mounting height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching segments
Number of movement sensors: 4, separately adjustable
Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
Number of IR channels: 10 for controlling KNX devices, 10 for configuration
EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Accessories: Surface-mounted housing for ARGUS Presence MTN550619
Transmitter: IR universal remote control MTN5761-0000
Contents: With bus connecting terminal and supporting plate.