KNX MTN644892 Binary input REG-K/4×24, light grey

Main
For connecting four conventional devices with AC/DC 24 V outputs to the KNX.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Input voltage: AC / DC 24 V
Inputs: 4
Input current: DC 15 mA (30 V),
AC 6 mA (27 V)
0 signal:  5 V
1 signal:  11 V
Cable length: max. 100 m
Device width: 2.5 modules = approx. 45 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey