KNX MTN644592 Binary Input REG-K/8×10, light grey

Main
For connecting eight conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage
SELV, electrically isolated from the bus.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Inputs: 8
Contact voltage: max. 10 V, clocked
Contact current: max. 2 mA, pulsing
Cable length: max. 50 m
Device width: 4 modules = approx. 70 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey