KNX Binary inputs Archives - www.elektrotehnika.mk

KNX MTN644692 Binary Input REG-K/8×230, light grey

elektrotehnika — Thu, 16 Jul 2020 09:10:57 +0000

Main
Range of product KNX
Product or component type Binary input
Bus type KNX
Complementary
18 mm pitches 4
Wiring device mounting DIN rail
rated operational voltage 230 V AC 50 Hz
Number of inputs 8
Input type Binary
Local signalling LED
Environment
IP degree of protection IP20
Environmental health and issues Halogen free
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 264 G
Package 1 Height 8 Cm
Package 1 width 12.4 Cm
Package 1 Length 15.8 Cm
Unit Type of Package 2 S03
Number of Units in Package 2 10
Package 2 Weight 3.09 Kg
Package 2 Height 30 Cm
Package 2 width 30 Cm
Package 2 Length 40 Cm

The post KNX MTN644692 Binary Input REG-K/8×230, light grey appeared first on www.elektrotehnika.mk.

KNX MTN644992 Binary Input REG-K/4×230, light grey

elektrotehnika — Thu, 16 Jul 2020 08:58:20 +0000

Main
For connecting four conventional devices with AC 230 V outputs to the KNX.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Input voltage: AC 230 V, 50-60Hz
Inputs: 4
Input current: AC 12 mA
0 signal:  40 V
1 signal:  160 V
Cable length: max. 100 m
Device width: 2.5 modules = approx. 45 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey

The post KNX MTN644992 Binary Input REG-K/4×230, light grey appeared first on www.elektrotehnika.mk.

KNX MTN644792 Binary Input REG-K/8×24, light grey

elektrotehnika — Thu, 16 Jul 2020 08:43:51 +0000

Main
For connecting 8 conventional devices with AC/DC 24 V outputs to KNX.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Input voltage: AC/DC 24V
Inputs: 8
Input current: DC approx. 15 mA/AC approx. 6 mA
Line length: max. 100 m
Device width: 4 modules = approx. 72 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey

The post KNX MTN644792 Binary Input REG-K/8×24, light grey appeared first on www.elektrotehnika.mk.

KNX MTN644892 Binary input REG-K/4×24, light grey

elektrotehnika — Thu, 16 Jul 2020 08:17:58 +0000

Main
For connecting four conventional devices with AC/DC 24 V outputs to the KNX.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Input voltage: AC / DC 24 V
Inputs: 4
Input current: DC 15 mA (30 V),
AC 6 mA (27 V)
0 signal:  5 V
1 signal:  11 V
Cable length: max. 100 m
Device width: 2.5 modules = approx. 45 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey

The post KNX MTN644892 Binary input REG-K/4×24, light grey appeared first on www.elektrotehnika.mk.

KNX MTN644592 Binary Input REG-K/8×10, light grey

elektrotehnika — Tue, 14 Jul 2020 13:55:43 +0000

Main
For connecting eight conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage
SELV, electrically isolated from the bus.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Inputs: 8
Contact voltage: max. 10 V, clocked
Contact current: max. 2 mA, pulsing
Cable length: max. 50 m
Device width: 4 modules = approx. 70 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey

The post KNX MTN644592 Binary Input REG-K/8×10, light grey appeared first on www.elektrotehnika.mk.

KNX MTN644492 Binary Input REG-K/4×10, light grey

elektrotehnika — Tue, 14 Jul 2020 11:29:12 +0000

Main
For connecting four conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage
SELV, electrically isolated from the bus.
Complementary
With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected
using a bus connecting terminal; a data rail is not necessary.
The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for
operation once the application has been loaded.
KNX software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-
, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse
edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
Inputs: 4
Contact voltage: max. 10 V, clocked
Contact current: max. 2 mA, pulsing
Cable length: max. 50 m
Device width: 2.5 modules = approx. 45 mm
Contents: With bus connecting terminal and cable cover.
Colour: light grey

The post KNX MTN644492 Binary Input REG-K/4×10, light grey appeared first on www.elektrotehnika.mk.