KNX Archives - www.elektrotehnika.mk

KNX MTN663991 brightness and temperature sensor, light grey

elektrotehnika — Tue, 21 Jul 2020 14:56:58 +0000

The sensor records brightness and temperature and transmits these values to the bus. It has
a temperature sensor and a brightness sensor.
■ 3 universal channels for single tasks or logic operations. Temperature and brightness
threshold in any combination.
■ Sun protection channel for blinds/roller shutter control. Objects for: twilight threshold,
brightness threshold, drive control, automatic sun function, teaching, security.
■ Automatic sun protection. Controls the blinds automatically during the day.
■ Teaching object. With this, every brightness threshold can be reset by the touch of a key.
Suitable for mounting on an outside wall.
With integrated bus coupler. The bus is connected using a bus connecting terminal.
Power consumption: max. 150 mW
Sensors: 2
Temperature measurement range: - 25 °C to + 55 °C (±5 % or ±1 degree)
Brightness measurement range: 1 to 100,000 lux (±20% or ±5 lux)
Type of protection: IP 54 according to DIN EN 60529 for vertical installation with cover
Dimensions: 110 x 72 x 54 mm

The post KNX MTN663991 brightness and temperature sensor, light grey appeared first on www.elektrotehnika.mk.

KNX MTN630419 ARGUS Presence 180/2.20 m flush-mounted, polar white, glossy

elektrotehnika — Tue, 21 Jul 2020 14:41:39 +0000

For System M.
Presence detection indoors.
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted
via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device
constantly monitors the brightness in the room. If sufficient natural light is at hand, the device
switches the artificial light off even if a person is present. The overshoot time can be adjusted
using the ETS.
With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation
at 2.2 m. With anti-crawl protection.
KNX software functions: Five movement/presence blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, monitoring, safety pause, disable function. Two movement
sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase
timer. Actual brightness value: can be detected via the internal and/or an external light
sensor. Actual value correction.
Angle of detection: 180°
Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)
Mounting height: 2.2 m or 1.1 m at half the range
Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours
(ETS)
Number of levels: 6
Number of zones: 46
Number of movement sensors: 2, separately adjustable
Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal and supporting plate.
With cover segments to limit the area of detection.

The post KNX MTN630419 ARGUS Presence 180/2.20 m flush-mounted, polar white, glossy appeared first on www.elektrotehnika.mk.

KNX MTN630960 ARGUS Presence with light control and IR receiver, aluminium

elektrotehnika — Tue, 21 Jul 2020 14:28:46 +0000

Presence detection indoors.
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted
via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device
constantly monitors the brightness in the room. If sufficient natural light is at hand, the device
switches the artificial light off even if a person is present. The overshoot time can be adjusted
using the ETS.
Light control enables the required brightness in a room to be achieved permanently. Dimming
and the optional use of a second lighting group maintains a constant brightness.
Individual ARGUS Presence configurations can be changed or other KNX devices can be
controlled remotely using the IR receiver.
With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal
installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for
ARGUS Presence.
KNX software functions: Five movement/presence blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
An additional light control block: brightness can be maintained constant by dimming and an
additional adjustable level.
IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors
or range.
Normal operation, master, slave, monitoring, safety pause, disable function. Four movement
sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase
timer. Actual brightness value: can be detected via the internal and/or an external light
sensor. Actual value correction.
Angle of detection: 360°
Range: a radius of max. 7 m (at a mounting height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching segments
Number of movement sensors: 4, separately adjustable
Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
Number of IR channels: 10 for controlling KNX devices, 10 for configuration
EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Accessories: Surface-mounted housing for ARGUS Presence MTN550619
Transmitter: IR universal remote control MTN5761-0000
Contents: With bus connecting terminal and supporting plate.

The post KNX MTN630960 ARGUS Presence with light control and IR receiver, aluminium appeared first on www.elektrotehnika.mk.

KNX MTN630919 Movement Detector ARGUS Presence with light control and IR receiver, polar white

elektrotehnika — Tue, 21 Jul 2020 14:24:02 +0000

The post KNX MTN630919 Movement Detector ARGUS Presence with light control and IR receiver, polar white appeared first on www.elektrotehnika.mk.

KNX MTN630819 ARGUS Presence, polar white

elektrotehnika — Tue, 21 Jul 2020 13:58:05 +0000

Presence detection indoors.
If KNX ARGUS Presence detects smaller
movements in the room, data telegrams are
transmitted via KNX to control the lighting,
blind or heating at the same time.
When the lighting is controlled by brightnessdependent
movement detection, the device
constantly monitors the brightness in the
room. If sufficient natural light is at hand, the
device switches the artificial light off even if a
person is present. The overshoot time can be
adjusted using the ETS.
With integrated bus coupling unit. For ceiling
mounting in a size 60 mounting box, optimal
installation at 2.5 m. Can also be mounted to
ceilings using the surface mounting housing
for ARGUS Presence.
KNX software functions: Five movement/
presence blocks: up to four functions can be
triggered per block. Telegrams: 1 bit, 1 byte,
2 bytes.
Normal operation, master, slave, monitoring,
safety pause, disable function. Four movement
sensors: the sensitivity and range can
be set separately for each sensor. Self-adjusting
staircase timer. Actual brightness value:
can be detected via the internal and/or an
external light sensor. Actual value correction.
Angle of detection: 360°
Range: a radius of max. 7 m (at a mounting
height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching
segments
Number of movement sensors: 4, separately
adjustable
Light sensor: internal light sensor infinitely
adjustable from approx. 10 to 2000 Lux
(ETS); external light sensor via KNX
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Accessories: Surface-mounted housing for
ARGUS Presence MTN550619
Contents: With bus connecting terminal and
supporting plate.

The post KNX MTN630819 ARGUS Presence, polar white appeared first on www.elektrotehnika.mk.

KNX MTN630860 ARGUS Presence, aluminium

elektrotehnika — Tue, 21 Jul 2020 13:41:31 +0000

Presence detection indoors.
If KNX ARGUS Presence detects smaller
movements in the room, data telegrams are
transmitted via KNX to control the lighting,
blind or heating at the same time.
When the lighting is controlled by brightnessdependent
movement detection, the device
constantly monitors the brightness in the
room. If sufficient natural light is at hand, the
device switches the artificial light off even if a
person is present. The overshoot time can be
adjusted using the ETS.
With integrated bus coupling unit. For ceiling
mounting in a size 60 mounting box, optimal
installation at 2.5 m. Can also be mounted to
ceilings using the surface mounting housing
for ARGUS Presence.
KNX software functions: Five movement/
presence blocks: up to four functions can be
triggered per block. Telegrams: 1 bit, 1 byte,
2 bytes.
Normal operation, master, slave, monitoring,
safety pause, disable function. Four movement
sensors: the sensitivity and range can
be set separately for each sensor. Self-adjusting
staircase timer. Actual brightness value:
can be detected via the internal and/or an
external light sensor. Actual value correction.
Angle of detection: 360°
Range: a radius of max. 7 m (at a mounting
height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching
segments
Number of movement sensors: 4, separately
adjustable
Light sensor: internal light sensor infinitely
adjustable from approx. 10 to 2000 Lux
(ETS); external light sensor via KNX
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Accessories: Surface-mounted housing for
ARGUS Presence MTN550619
Contents: With bus connecting terminal and
supporting plate.

The post KNX MTN630860 ARGUS Presence, aluminium appeared first on www.elektrotehnika.mk.

KNX MTN630760 ARGUS Presence Basic, aluminium

elektrotehnika — Tue, 21 Jul 2020 13:17:05 +0000

The post KNX MTN630760 ARGUS Presence Basic, aluminium appeared first on www.elektrotehnika.mk.

KNX MTN630719 Movement Detector ARGUS Presence Basic, polar white

elektrotehnika — Tue, 21 Jul 2020 13:07:27 +0000

The post KNX MTN630719 Movement Detector ARGUS Presence Basic, polar white appeared first on www.elektrotehnika.mk.

KNX MGU3.533.12 Movement detector, 230 VAC, 2 modules, graphite

elektrotehnika — Tue, 21 Jul 2020 12:52:07 +0000

2 modules
In Unica Top design.
Movement detector for indoors.
When a movement is detected, a data telegram defined by the programming is transmitted.
With integrated bus coupler. The bus is connected using a bus connecting terminal.
KNX software functions: Five movement blocks: up to four functions can be triggered per
block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation and surveillance operation, master, slave, safety pause, disable function.
Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two
movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting
staircase timer.
Angle of detection: 180°
Number of movement sensors: 2, sector-orientated, adjustable (ETS)
Recommended mounting height: 1 m to 2,5 m
Range: at 2.15 m mounting height: Approx. 9 m on all sides, adjustable in 10 steps (rotary
switch or ETS)
Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch)
or from 10 lux to 2000 lux (ETS)
Overshoot time: Adjustable in 6 steps from approx. 1 s to approx. 8 min (rotary switch) or
adjustable from 1 s to 255 hours (ETS)
EC guidelines: Low-voltage guideline 2006/95/EEC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal.

The post KNX MGU3.533.12 Movement detector, 230 VAC, 2 modules, graphite appeared first on www.elektrotehnika.mk.

KNX MGU3.533.30 Movement Detector, 230 VAC, 2 modules, aluminium

elektrotehnika — Tue, 21 Jul 2020 12:25:14 +0000

The post KNX MGU3.533.30 Movement Detector, 230 VAC, 2 modules, aluminium appeared first on www.elektrotehnika.mk.

KNX MGU3.533.25 Unica-Movement Detector , 230 VAC , 2 modules, ivory

elektrotehnika — Tue, 21 Jul 2020 12:09:10 +0000

2 modules
In Unica design.
Movement detector for indoors.
When a movement is detected, a data telegram defined by the programming is transmitted.
With integrated bus coupler. The bus is connected using a bus connecting terminal.
KNX software functions: Five movement blocks: up to four functions can be triggered per
block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation and surveillance operation, master, slave, safety pause, disable function.
Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two
movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting
staircase timer.
Angle of detection: 180°
Number of movement sensors: 2, sector-orientated, adjustable (ETS)
Recommended mounting height: 1 m to 2,5 m
Range: at 2.15 m mounting height: Approx. 9 m on all sides, adjustable in 10 steps (rotary
switch or ETS)
Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch)
or from 10 lux to 2000 lux (ETS)
Overshoot time: Adjustable in 6 steps from approx. 1 s to approx. 8 min (rotary switch) or
adjustable from 1 s to 255 hours (ETS)
EC guidelines: Low-voltage guideline 2006/95/EEC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal.

The post KNX MGU3.533.25 Unica-Movement Detector , 230 VAC , 2 modules, ivory appeared first on www.elektrotehnika.mk.

KNX MGU3.533.18 Unica Movement detector – 230 VAC – 2 m – white

elektrotehnika — Fri, 17 Jul 2020 09:00:59 +0000

The post KNX MGU3.533.18 Unica Movement detector – 230 VAC – 2 m – white appeared first on www.elektrotehnika.mk.

KNX MTN6302-6035 ARGUS Presence 180/2.20 m flush-mounted, lotus white

elektrotehnika — Fri, 17 Jul 2020 08:40:40 +0000

Presence detection indoors.
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted
via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device
constantly monitors the brightness in the room. If sufficient natural light is at hand, the device
switches the artificial light off even if a person is present. The overshoot time can be adjusted
using the ETS.
With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation
at 2.2 m. With anti-crawl protection.
KNX software functions: Five movement/presence blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, monitoring, safety pause, disable function. Two movement
sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase
timer. Actual brightness value: can be detected via the internal and/or an external light
sensor. Actual value correction.
Angle of detection: 180°
Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)
Mounting height: 2.2 m or 1.1 m at half the range
Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours
(ETS)
Number of levels: 6
Number of zones: 46
Number of movement sensors: 2, separately adjustable
Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Accessories: Fixing frame for 3-module box MTN6270-0015
D-Life frame, 1-gang, for 3-module box MTN6010-65xx
Contents: With bus connecting terminal and supporting plate.
With cover segments to limit the area of detection.

The post KNX MTN6302-6035 ARGUS Presence 180/2.20 m flush-mounted, lotus white appeared first on www.elektrotehnika.mk.

KNX MTN631719 Movement detector ARGUS 180/2.20 m flush-mounted, polar white, glossy

elektrotehnika — Fri, 17 Jul 2020 08:30:57 +0000

The post KNX MTN631719 Movement detector ARGUS 180/2.20 m flush-mounted, polar white, glossy appeared first on www.elektrotehnika.mk.

KNX MTN631744 Movement detector 180/2.20 m flush-mounted, white, glossy

elektrotehnika — Fri, 17 Jul 2020 08:25:29 +0000

Indoor movement detector with anti-crawl
protection.
When a movement is detected, a data
telegram defined by the programming is
transmitted.
With integrated bus coupling unit. For wall
mounting in a size 60 mounting box, optimal
installation at 2.2 m.
KNX software functions: Five movement
blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, safety
pause, disable function. Sensitivity, brightness
and staircase timer can be set using the
ETS or the potentiometer. Two movement
sensors: the sensitivity and range can be set
separately for each sensor. Self-adjusting
staircase timer.
Angle of detection: 180°
Range: 8 m right/left, 12 m to the front (for a
mounting height of 2.20 m)
Mounting height: 2.2 m or 1.1 m with half
the range
Number of levels: 6
Number of zones: 46
Number of movement sensors: 2, sectororientated,
adjustable
Sensitivity: infinitely adjustable (ETS or
potentiometer)
Light sensor: infinitely adjustable from approx.
10 to 2000 Lux (ETS or potentiometer)
Time: adjustable in steps from 1 s to 8 min
(potentiometer) or adjustable from 1 s to 255
hours (ETS)
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal and
supporting plate.
With cover segments to limit the area of
detection.

The post KNX MTN631744 Movement detector 180/2.20 m flush-mounted, white, glossy appeared first on www.elektrotehnika.mk.

KNX MTN631619 Movement detector ARGUS 180, flush-mounted, polar white, glossy

elektrotehnika — Fri, 17 Jul 2020 08:05:09 +0000

Movement detector for indoors.
When a movement is detected, a data
telegram defined by the programming is
transmitted.
With integrated bus coupling unit.
KNX software functions: Five movement
blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, safety
pause, disable function. Sensitivity, brightness
and staircase timer can be set using
the ETS or the potentiometer. Self-adjusting
staircase timer.
Angle of detection: 180°
Range: 8 m (for mounting height of 1.1 m)
Number of levels: 1
Number of zones: 14
Sensitivity: infinitely adjustable (ETS or
potentiometer)
Light sensor: infinitely adjustable from approx.
10 to 2000 Lux (ETS or potentiometer)
Time: adjustable in steps from 1 s to 8 min
(potentiometer) or adjustable from 1 s to 255
hours (ETS)
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal and
supporting plate.

The post KNX MTN631619 Movement detector ARGUS 180, flush-mounted, polar white, glossy appeared first on www.elektrotehnika.mk.

KNX MTN631644 Movement Detector ARGUS 180, flush-mounted, white, glossy

elektrotehnika — Thu, 16 Jul 2020 13:52:56 +0000

For System M.
Movement detector for indoors.
When a movement is detected, a data
telegram defined by the programming is
transmitted.
With integrated bus coupling unit.
KNX software functions: Five movement
blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, safety
pause, disable function. Sensitivity, brightness
and staircase timer can be set using
the ETS or the potentiometer. Self-adjusting
staircase timer.
Angle of detection: 180°
Range: 8 m (for mounting height of 1.1 m)
Number of levels: 1
Number of zones: 14
Sensitivity: infinitely adjustable (ETS or
potentiometer)
Light sensor: infinitely adjustable from approx.
10 to 2000 Lux (ETS or potentiometer)
Time: adjustable in steps from 1 s to 8 min
(potentiometer) or adjustable from 1 s to 255
hours (ETS)
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal and
supporting plate.

The post KNX MTN631644 Movement Detector ARGUS 180, flush-mounted, white, glossy appeared first on www.elektrotehnika.mk.

KNX MTN632569 Movement detector ARGUS 220, aluminium

elektrotehnika — Thu, 16 Jul 2020 11:32:58 +0000

KNX movement detector for outdoors. 220° surface monitoring for large house fronts and
sections of the house. With integrated bus coupler. The physical address is programmed with
a magnet.
■ 360° short-range zone (approx. 4 m radius).
■ Large wiring compartment and plug system.
■ Looping is possible.
■ LED function display for fast alignment at the installation site.
■ Operating elements are protected under the easily accessible cover plate.
■ Flexibly adjustable sensor head.
■ Possible to blank out individual lens areas.
Can be installed on walls and ceilings without additional accessories. Can be mounted on
inner/outer corners and stationary pipes using a mounting bracket.
KNX software functions: Five movement blocks: up to four functions can be triggered per
block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and
staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer.
Angle of detection: 220°
Range: max. 16 m
Number of levels: 7
Number of zones: 112 with 448 switching segments
Light sensor: infinitely variable from approx. 3 - 1000 lux, ∞ lux (infinite: movement detection
is independent of the position of the sensor head)
Time: can be set externally from 1 s to approx. 8 min. in 6 levels or via ETS from approx. 3 s
to approx. 152 hours
Sensitivity: infinitely adjustable
Possible settings for sensor head:
Wall mounting: 9° up, 24° down, 12° left/right, ±12° axial
Ceiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axial
EC directives: Low-voltage guideline 2006/95/EC and EMC directive 2004/108/EC
Type of protection: IP 55
Accessories: Mounting bracket MTN565291, Programming magnet MTN639190
Contents: With cover plate and segments to limit the area of detection, screws and plugs.

The post KNX MTN632569 Movement detector ARGUS 220, aluminium appeared first on www.elektrotehnika.mk.

KNX MTN632519 Movement Detector ARGUS 220, polar white

elektrotehnika — Thu, 16 Jul 2020 09:49:25 +0000

The post KNX MTN632519 Movement Detector ARGUS 220, polar white appeared first on www.elektrotehnika.mk.

KNX MTN644692 Binary Input REG-K/8×230, light grey

elektrotehnika — Thu, 16 Jul 2020 09:10:57 +0000

Main
Range of product KNX
Product or component type Binary input
Bus type KNX
Complementary
18 mm pitches 4
Wiring device mounting DIN rail
rated operational voltage 230 V AC 50 Hz
Number of inputs 8
Input type Binary
Local signalling LED
Environment
IP degree of protection IP20
Environmental health and issues Halogen free
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 264 G
Package 1 Height 8 Cm
Package 1 width 12.4 Cm
Package 1 Length 15.8 Cm
Unit Type of Package 2 S03
Number of Units in Package 2 10
Package 2 Weight 3.09 Kg
Package 2 Height 30 Cm
Package 2 width 30 Cm
Package 2 Length 40 Cm

The post KNX MTN644692 Binary Input REG-K/8×230, light grey appeared first on www.elektrotehnika.mk.