KNX MTN630819 ARGUS Presence, polar white

Presence detection indoors.
If KNX ARGUS Presence detects smaller
movements in the room, data telegrams are
transmitted via KNX to control the lighting,
blind or heating at the same time.
When the lighting is controlled by brightnessdependent
movement detection, the device
constantly monitors the brightness in the
room. If sufficient natural light is at hand, the
device switches the artificial light off even if a
person is present. The overshoot time can be
adjusted using the ETS.
With integrated bus coupling unit. For ceiling
mounting in a size 60 mounting box, optimal
installation at 2.5 m. Can also be mounted to
ceilings using the surface mounting housing
for ARGUS Presence.
KNX software functions: Five movement/
presence blocks: up to four functions can be
triggered per block. Telegrams: 1 bit, 1 byte,
2 bytes.
Normal operation, master, slave, monitoring,
safety pause, disable function. Four movement
sensors: the sensitivity and range can
be set separately for each sensor. Self-adjusting
staircase timer. Actual brightness value:
can be detected via the internal and/or an
external light sensor. Actual value correction.
Angle of detection: 360°
Range: a radius of max. 7 m (at a mounting
height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching
segments
Number of movement sensors: 4, separately
adjustable
Light sensor: internal light sensor infinitely
adjustable from approx. 10 to 2000 Lux
(ETS); external light sensor via KNX
EC Directives: Low-voltage guideline
2006/95/EC and EMC guideline 2004/108/EC
Accessories: Surface-mounted housing for
ARGUS Presence MTN550619
Contents: With bus connecting terminal and
supporting plate.