KNX MGU3.533.12 Movement detector, 230 VAC, 2 modules, graphite

2 modules
In Unica Top design.
Movement detector for indoors.
When a movement is detected, a data telegram defined by the programming is transmitted.
With integrated bus coupler. The bus is connected using a bus connecting terminal.
KNX software functions: Five movement blocks: up to four functions can be triggered per
block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation and surveillance operation, master, slave, safety pause, disable function.
Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Two
movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting
staircase timer.
Angle of detection: 180°
Number of movement sensors: 2, sector-orientated, adjustable (ETS)
Recommended mounting height: 1 m to 2,5 m
Range: at 2.15 m mounting height: Approx. 9 m on all sides, adjustable in 10 steps (rotary
switch or ETS)
Detection brightness: Infinite setting from approx. 10 lux to approx.1000 lux (rotary switch)
or from 10 lux to 2000 lux (ETS)
Overshoot time: Adjustable in 6 steps from approx. 1 s to approx. 8 min (rotary switch) or
adjustable from 1 s to 255 hours (ETS)
EC guidelines: Low-voltage guideline 2006/95/EEC and EMC guideline 2004/108/EC
Contents: With bus connecting terminal.