KNX MTN6302-6035 ARGUS Presence 180/2.20 m flush-mounted, lotus white

Presence detection indoors.
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted
via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device
constantly monitors the brightness in the room. If sufficient natural light is at hand, the device
switches the artificial light off even if a person is present. The overshoot time can be adjusted
using the ETS.
With integrated bus coupling unit. For wall mounting in a size 60 mounting box, optimal installation
at 2.2 m. With anti-crawl protection.
KNX software functions: Five movement/presence blocks: up to four functions can be triggered
per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, monitoring, safety pause, disable function. Two movement
sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase
timer. Actual brightness value: can be detected via the internal and/or an external light
sensor. Actual value correction.
Angle of detection: 180°
Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)
Mounting height: 2.2 m or 1.1 m at half the range
Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours
(ETS)
Number of levels: 6
Number of zones: 46
Number of movement sensors: 2, separately adjustable
Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Accessories: Fixing frame for 3-module box MTN6270-0015
D-Life frame, 1-gang, for 3-module box MTN6010-65xx
Contents: With bus connecting terminal and supporting plate.
With cover segments to limit the area of detection.