Name | Value | Unit |
Conformity marking | CE | |
Pollution degree (1) | 2 | |
Rated voltage EN (1) [V] | 250 | V |
Rated surge voltage (1) [kV] | 2.5 | kV |
Pull-in time (typ.) [ms] | 25 | ms |
Mechanical life | 20 x 106 switching operations | |
Drop-out time (typ.) [ms] | 25 | ms |
Nominal input current (coil 20 °C) | 8,3 mA | |
Operating power | 1.2 VA | |
Input voltage range | VN -20 % ... +10 % | |
Max. switching voltage | 250 VAC | |
Max. switching power (resistive) | 1,250 VA AC / 150 VA DC | |
Recommended minimum load | 12 V / 100 mA | |
Bounce time (typ) [ms] | 4 | ms |
Dielectric strength, contact-coil (AC, 1 min) [kVrms | 1.5 | kVrms |
Dielectric strength open contact (AC, 1 min) [kVrms | 1 | kVrms |
Nominal input voltage (VN) | 230 VAC | |
Max. continuous current | 5 A | |
Max. make current (resistive) at 10 % OT * | 15 A / 4 s | |
Rated power | 1.2 VA | |
Holding voltage | 80 % of VN | |
Release voltage | 0.3 x V | |
Switching power (max.) AC1 / AC15 | 1250VA / 300VA | |
1-phase motor load AC3 [kW] | 0.12 | kW |
Min. switching load | 12 V / 100 mA | |
Electrical life | 1 x 105 switching operations | |
Degree of protection | RTII | |
Connection technology (1) | CAGE CLAMP® S | |
Cross section from (1) [mm?] | 0.34 | mm? |
Cross section up to (1) [mm?] | 1.5 | mm? |
Cross section from (1) [AWG] | 22 | AWG |
Cross section up to (1) [AWG] | 16 | AWG |
Cross section up to (2) [mm?] | 2.5 | mm? |
Stripped length from (1) [mm] | 9 | mm |
Stripped length up to (1) [mm] | 10 | mm |
Stripped length (1) [in] | 0.37 | in |
Contact material | AgCe | |
Weight [g] | 96.592 | g |
Width [mm] | 31 | mm |
Width [in] | 1.22 | in |
Height [mm] | 73 | mm |
Height [in] | 2.874 | in |
Length [mm] | 97 | mm |
Length [in] | 3.819 | in |
Storage temperature | -40 °C ... +80 °C | |
Standards/Specifications | GL, UL 508 | |
Type of mounting | DIN 35 rail | |
Ambient operating temperature at VN | -25 °C ... +70 °C | |
Ambient operating temperature for UL () | -25 °C ... +50 °C |