| Name | Value | Unit |
| Conformity marking | CE | |
| Pollution degree (1) | 2 | |
| Rated voltage EN (1) [V] | 250 | V |
| Rated surge voltage (1) [kV] | 2.5 | kV |
| Pull-in time (typ.) [ms] | 25 | ms |
| Mechanical life | 20 x 106 switching operations | |
| Drop-out time (typ.) [ms] | 25 | ms |
| Nominal input current (coil 20 °C) | 36,9 mA | |
| Operating power | 0.9 W | |
| Input voltage range | VN -20 % ... +10 % | |
| Max. switching voltage | 30 VDC * | |
| Recommended minimum load | 12 V / 100 mA | |
| Bounce time (typ) [ms] | 4 | ms |
| Dielectric strength, contact-coil (AC, 1 min) [kVrms | 1.5 | kVrms |
| Dielectric strength open contact (AC, 1 min) [kVrms | 1 | kVrms |
| Nominal input voltage (VN) | 24 VDC | |
| Max. continuous current | 50 mA* | |
| Max. make current (resistive) at 10 % OT * | 15 A / 4 s | |
| Rated power | 0.9 W | |
| Holding voltage | 50 % of VN | |
| Release voltage | 0.1 x V | |
| Switching power (max.) AC1 / AC15 | 1250VA / 300VA | |
| 1-phase motor load AC3 [kW] | 0.12 | kW |
| Min. switching load | 5 V/1 mA/50 mW | |
| Electrical life | 1 x 105 switching operations | |
| Connection technology (1) | CAGE CLAMP® S | |
| Cross section from (1) [mm?] | 0.34 | mm? |
| Cross section up to (1) [mm?] | 1.5 | mm? |
| Cross section from (1) [AWG] | 22 | AWG |
| Cross section up to (1) [AWG] | 16 | AWG |
| Cross section up to (2) [mm?] | 2.5 | mm? |
| Stripped length from (1) [mm] | 9 | mm |
| Stripped length up to (1) [mm] | 10 | mm |
| Stripped length (1) [in] | 0.37 | in |
| Contact material | AgCe + 5µm Au | |
| Weight [g] | 96.092 | g |
| Width [mm] | 31 | mm |
| Width [in] | 1.22 | in |
| Height [mm] | 73 | mm |
| Height [in] | 2.874 | in |
| Length [mm] | 97 | mm |
| Length [in] | 3.819 | in |
| Storage temperature | -40 °C ... +80 °C | |
| Standards/Specifications | GL, UL 508 | |
| Ambient operating temperature at VN | -25 °C ... +70 °C | |
| Ambient operating temperature for UL () | -25 °C ... +50 °C |